基于XPS对硫铁矿去除SeO2-3的机理研究

硒是动植物及人体生长必需的十五种微量元素之一，具有清除体内自由基、抗氧化、增强免疫力等功能，但其安全剂量的范围却很窄。利用扫描电子显微镜（SEM）和X射线衍射仪（XRD）对湿法球磨制备的硫铁矿形貌进行了表征。SEM观测发现加乙醇助磨后的硫铁矿为粒径大小较均匀的球形颗粒团聚体，粒径范围在17～200 nm之间，平均粒径138 nm。XRD衍射图谱中的特征峰与FeS₂衍射图谱中各峰位置基本一致，因此判定硫铁矿中主要化学组分为FeS₂，且图谱中基本没有杂峰，表明制备过程中并未混入杂质，样品纯度较高。实验结果表明，该法制备的硫铁矿具有颗粒粒径小、比表面积大、反应活性高等优点。研究中利用X射线光电子能谱仪（XPS）对硫铁矿去除水体中SeO2-₃的机理进行了研究。研究结果表明, （1）在较为广泛的实验pH范围（pH 2.2～11.5），硫铁矿均能有效去除水体中SeO2-₃，去除效率（除pH值7.8以外）均达到90%以上；（2）硫铁矿与SeO2-₃发生反应后，其主要组成元素的XPS特征峰结合能有所减小，表明硫铁矿表面发生了一定化学变化；（3）酸碱环境下硫铁矿去除SeO2-₃的机理不完全相同，酸性环境下，硫铁矿对SeO2-₃的去除是单纯的氧化还原过程，即硫铁矿中被酸活化的S2-₂将SeO2-₃还原为单质Se(0)，并且酸性越强，SeO2-₃去除效果越好；碱性环境下，SeO2-₃的去除过程中氧化还原与络合反应并存，硫铁矿表面有络合态Fe(OH)SeO₃和单质Se(0)两种存在形态，且碱性越强，络合态Fe(OH)SeO₃含量越高。以上研究结果为硫铁矿去除固定水体和土壤中以SeO2-₃为代表的可变价金属阴离子提供重要理论依据和应用基础。     

Derived dimension via τ-tilting theory

Czechoslovak Mathematical Journal - Comparing the bounded derived categories of an algebra and of the endomorphism algebra of a given support τ-tilting module, we find a relation between the...     

室温铁磁性Sr3YCo4O10.5+δ多晶有序化的烧结工艺及电磁性能

采用固相反应法制备了不同烧结温度(950~1 180 ℃)、烧结时间、烧结次数共7种工艺的Sr₃YCo₄O_10.5+δ多晶块材,通过热分析、XRD、SEM确定了有序化相变和最佳烧结工艺(1 180 ℃/24 h+1 180 ℃/24 h),并研究了多晶的电磁性能。结果表明,964 ℃完全晶化的四方相Sr₃YCo₄O_10.5在1 042 ℃吸氧(δ)完成有序化,生成Sr₃YCo₄O_10.5+δ,而1 100 ℃和1 180 ℃烧结的样品均出现(103)、(215)超结构峰,验证了其结构的有序性。块材均呈半导体电输运行为,二次烧结晶格完整性提高,晶粒长大,300 K时电阻率仅为0.06 Ω·cm,居里温度(T_c)~335 K,零场冷曲线(ZFC)上的Hopkinson峰源于低温时被冻结的磁矩随温度升高转向磁场方向,磁化强度在298 K达到最大,随后受热扰动的影响减小。室温铁磁性源于有序结构导致的中自旋或高自旋态Co³⁺的e_g轨道有序。     

Flatness,plateau limit and limit length of single-plateau functions

In this paper we consider iteration of single-plateau functions, an important class of continuous functions with infinitely many forts, and investigate changes of number and length of plateaux under iteration.We use the indices flatness, plateau limit and limit length to formulate those changes. Furthermore, we compute the flatness, plateau limit and limit length for all the nine types of single-plateau functions.     

A colorimetric sensing strategy based on enzyme@metal-organic framework and oxidase-like IrO2/MnO2 nanocomposite for α-glucosidase inhibitor screening

Microchimica Acta - Testing gluten content in food, before it reaches the consumer, becomes a major challenge where cross-contamination during processing and transportation is a very common...     

Two cubane-like [M4O4] {M = nickel(II), cobalt(II)} complexes: syntheses,crystal structures and magnetic properties

Transition Metal Chemistry - Two cubane-like complexes, namely [Ni4L4(HOEt)4] (1), [Co4L4(HOEt)4] (2) (H2L?=?(E)-2-((3-hydroxypropylimino)methyl)-6-methoxyphenol), were prepared under...     

Surface of room temperature ionic liquid [bmim][PF6] studied by polarization- and experimental configuration-dependent sum frequency generation vibrational spectroscopy

Understanding and control of the surface properties such as molecular orientations are of great importance in numerous applications of ionic liquids. However, there remain discrepancies among the previous experimental and theoretical studies on the surface orientation and structures of room temperature ionic liquids(RTIL) systems. In this article, the orientation of 1-butyl-3-methylimidazolium([bmin]) cation at the air/liquid interface of a characteristic RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]), was investigated by the sum frequency generation vibrational spectroscopy(SFG-VS). Detailed polarization and experimental configuration analyses of the SFG-VS spectra showed the possibility of a small spectral splitting in the CH3 symmetric stretching region, which can be further attributed to the probable existence of multiple orientations for the interfacial [bmim] cations. In addition, the(N)–CH3 vibrations were absent, ruling out the prediction by several recent molecular dynamics simulations which state that portions of the [bmim] cations orient with a standing-up(N)–CH3 group at the ionic liquid surface. Hence, new realistic theoretical models have to be developed to reflect the complex nature of the ionic liquid surface.     

Observation and analysis of near-surface atmospheric aerosol optical properties in urban Beijing

Year-round measurements of the mass concentration and optical properties of fine aerosols(PM_2.5) from June 2009 to May 2010 at an urban site in Beijing were analyzed.The annual mean values of the PM_2.5 mass concentration,absorption coefficient（Ab）,scattering coefficient（Sc） and single scattering albedo（SSA）at 525 nm were 67±66μg/m³,64 ±62 Mm^-1,360 ±405 Mm^-1 and 0.82 ±0.09,respectively.The bulk mass absorption efficiency and scattering efficiency of the PM_2.5 at 525 nm were 0.78 m²/g and 5.55 m²/g,respectively.The Ab and Sc showed a similar diurnal variation with a maximum at night and a minimum in the afternoon,whereas SSA displayed an opposite diurnal pattern.Significant increases in the Ab and Sc were observed in pollution episodes caused by the accumulation of pollutants from both local and regional sources under unfavorable weather conditions.Aerosol loadings in dust events increased by several times in the spring,which had limited effects on the Ab and Sc due to the low absorption and scattering efficiency of dust particles.The frequency of haze days was the highest in autumn because of the high aerosol absorption and scattering under unfavorable weather conditions.The daily PM_2.5concentration should be controlled to a level lower than 64 μg/m³ to prevent the occurrence of haze days according to its exponentially decreased relationship with visibility.     

Characteristics of black carbon aerosol in Jiaxing,China during autumn 2013

We conducted measurements of black carbon（BC） aerosol in Jiaxing,China during autumn from September 26 to November 30,2013.We investigated temporal and diurnal variations of BC,and its correlations with meteorological parameters and other major pollutants.Results showed that hourly mass concentrations of BC ranged from 0.2 to 22.0 μg/m³,with an average of 5.1 μg/m³.The diurnai variation of BC exhibited a bimodal distribution,with peaks at 07:00 and 18:00.The morning peak was larger than the evening peak.The mass percentages of BC in PM_2.5 and PM₁₀ were 7.1%and 4.8%,respectively.The absorption coefficient of BC was calculated to be 44.4 Mm^-1,which accounted for 11.1%of the total aerosol extinction.BC was mainly emitted from local sources in southwestern Jiaxing where BC concentrations were generally greater than 11 μg/m³ during the measurement period.Correlation analysis indicated that the main sources of BC were motor vehicle exhaust,and domestic and industrial combustion.